Today I had to work late so I didn’t too much done.  But we only have to do one thing a day right?  So today I ran a wire for my strobe from the instrument pod to the top of the prop cage where I’m going to mount the strobe.  I wanted to find a position on the key switch that provide +12V whenever the key was in any position other than OFF.  Unfortunately this key switch does not provide that.  So I tapped off the +12V terminal that goes to the battery.  I just have to remember to turn the strobe switch off.  I would have liked for it to turn off if EITHER the strobe switch were turned off, or the key switch were turned off.  I’ll have to look for a different key switch down the road.